Price martch

BMW Ball Joint Parts

BMW has always put their passion for quality and modern designs at the forefront of their brand, which has pushed them into being one of the German big three automakers, with Audi and Mercedes. Their reputation for quality has been noticed in their products, as well, especially their ball joint parts. The lower ball joints are the only joints that can be replaced on your BMW. If the upper ball joints need maintenance, you will need to swap out the whole control arm. To do this, you will need a unique tool to release the ball joint from the lower control arm. Fortunately, this tool is not expensive and worth buying to complete this procedure at home. The first thing to do is jack your BMW off the ground and place the jack stand beneath the frame for safety. Lift the jack stand as close to the frame as you can. Take off your wheel with a lug wrench and use a socket and ratchet to detach the rear control arm-bushing bracket where it connects to the body. If you have questions about BMW’s ball joint parts or components, the FCP Euro team and website are always here for you.

BMW Ball Joint Parts Online

You are now ready to take off the nut and detach the front stabilizer from your control arm with the socket and ratchet. Take off the nut that links the control arm to the cross member with a ratchet and socket. Knock out the stud from the cross member with a rubber mallet. Use your socket and ratchet to take off the bolts that join the hub to your BMW’s struts and add a mark on the lower control arm where the ball joint joins to it. This will allow for precise alignment for the new ball joint. Next, take off the cotter pin and nut from the ball joint using your ball joint tool to push the ball joint out of the control arm. Put the new ball joint in the control arm and line it up with the mark you just made. Use your ball joint tool to push your new ball joint into the control arm. Install the nut using your socket and ratchet and then put the cotter pin in to secure the nut. Put back the hub to the struts and secure the bolts with a socket and ratchet. Put back the front stabilizer to the control arm and secure it with your socket and ratchet, as well. Now put back the stud and control arm to the cross member and secure it up with a ratchet and socket. Next, just attach the rear control arm back on the body and then secure it. Put your wheel back on and lower your BMW. You should duplicate these steps for the other side of the vehicle. FCP Euro's scholarly and practiced call center team is obtainable to answer any questions you have or support you may need. If you are uncertain or need input about which ball joint part or component is mandatory for your BMW, FCP has a large line up for the BMW brand. Check out the FCP Euro website for all parts, as well as our updated inventory. If you have questions, would like to put in a phone order, or just have feedback, do not waver in giving FCP Euro a call at 877-634-0063 to connect with our service friendly team.

↑ Take It to the Top ↑