Audi Windshield Parts
Audi has a long history as an auto manufacturer and has been designing and producing technologically driven vehicles and products from of their facilities in Germany for years. They are appreciated and renowned for creating some of the best luxury vehicles in the industry. Their elite values are shown off in their vehicle and product lines, and even in their windshield parts and components. You Audi’s windshield wiper motor does not need to be serviced often at all, but they will, over time, become worn wear and have to be replaced. Replacing your Audi’s wiper motor is pretty simple as long as you have the proper tools. You windshield wiper motor is built to withstand the ever-changing climates and seasons you will be driving through on a yearly basis. The first thing to do in starting this procedure is to find your windshield wiper motor, ordinarily located in your Audi’s firewall. Next up, utilize a fused jumper wire to get through your motor's relay. You can look in your owner’s manual to find this and then hook one of the sides to the positive battery terminal. Touch the other end to the positive on the motor and if you see the motor is working and the arms are moving, you should change out the relay. FCP Euro has uppermost quality Audi windshield parts and components, including all of Audi’s vehicle parts for your vehicle.
Audi Windshield Parts Online
You are ready to use the positive lead on your jumper wire to make contact with the positive terminal on your relay. If the wiper motor is working, you will then have to examine the gear assembly on the interior of your motor. If this is not working, keep going with the replacement process below. Find the ground strap and one end of will be connected to the motor case with a screw. The other end is connected to one of the wiper motor bolts. After you have found the grounding strap, take off the mount bolt with your ratchet. Put the ground strap to the side and take off all of the other bolts. Carefully remove the washer motor and remove it from the engine. Line up the mount holes on the replacement motor with the bolts on your Audi’s firewall and put the motor on the bolts to fasten secure in position with the nuts. Fasten the nuts so the motor is flat with the firewall and put the wiper motor grounding strap back. Make sure the wiper motor is working correctly by trying it out form within your Audi. Turn the ignition halfway on and give it a test run. FCP Euro's expert and devoted call center team is continuously ready to help out with any support or questions you have. If you would like advice to help find out which windshield part works perfectly in your Audi, FCP has an enormous supply for the Audi brand. Check out FCP Euro’s website for all products, as well as our continuously updating inventory. If you have questions, would like to put in a phone order, or just have feedback, do not hesitate to give FCP Euro a call at 877-634-0063 to connect with our service friendly team.